Rooftop solar sends average South Australia daytime power prices below zero

The combination of heavy proliferation of rooftop solar in South Australia and lower than average summer temperatures have combined to leave daytime solar prices to dive below zero at certain times in Q1 2021, according to a report from the AEMO.

South Australian rooftop solar drives daytime power prices below zero

RenewEconomy are reporting that South Australia set a new benchmark in the Australian electricity market, with its share of rooftop solar sending the average daytime wholesale price of electricity to below zero in the first quarter of 2021.

According to the Australia Energy Market Operator (AEMO), the average price of wholesale power in South Australia between 10am-3.30pm was -$12/MWh in Q1 – the first time this has ever happened to  Australia’s main electricity grid.

According to estimates from AEMO, up to 33% of South Australian and Queensland wind and solar capacity have installed automated bidding software, with a slightly smaller amount (~20%) in Victoria. The facilities most hit were the Tailem Bend solar farm and the Lincoln Gap wind farm, both in South Australia, and the Murra Warra wind farm in Victoria.

Record Q1 installation of rooftop solar photovoltaic (PV) capacity during the first three months of 2021 has led to a 3% decrease in average operational demand from the National Electricity Market (NEM), the lowest amount of operational demand in Q1 since 2002.

The AEMO have released the Quarterly Energy Dynamics Q1 2021 and it also notes that the weather may have had some input in these figures:

East coast average Q1 maximum temperatures were the lowest since 2012, with particularly mild weather in Sydney, Brisbane, and Melbourne. The resulting reduction in cooling load, coupled with record Q1 installation of distributed photovoltaic (PV) capacity, led to National Electricity Market (NEM) average operational demand reducing by 3% on Q1 2020 levels, declining to its lowest Q1 since 2002.

The report from AEMO is well worth reading if you’re interested – it’s available in PDF form by clicking here.

 

Read More Solar News:

Beryl Solar Farm reaches financial close.

First Solar have reached a financial close at the 87MW Beryl solar farm in New South Wales. The farm will be one of the world’s first to use First Solar’s Series 6 modules (with 420+ watts per module) and will be constructed by Downer EDI. 

Beryl Solar Farm – Construction and Financial Close

Beryl Solar Farm
Beryl Solar Farm (site: firstsolar.com.au)

Beryl is around five km from Gulgong in central west NSW. This is one of NSW’s biggest completed solar farms but there are some upcoming projects which will dwarf it (such as the 200MW Sunraysia solar farm in Balranald or the $380m Gunning Solar Farm – with solar there are always bigger plans in place!).

According to a press release on Reuters, the engineering, procurement and construction (EPC) contract is worth about $150m and construction will commence soon.

TransGrid’s head of business growth Richard Lowe discussed how they will be able to integrate into the project: “The project is located approximately 250 metres south of TransGrid’s Beryl Substation, so we have been able to offer a very competitive and attractive asset connection plan to First Solar,” Lowe said in a statement on the TransGrid website.

“The Beryl Solar Farm will connect directly into TransGrid’s high-voltage electricity transmission network via a 66kV connection to a new bay at Beryl Substation.

“This connection will allow the export of 87 megawatts of power into the National Electricity Market – enough to serve the needs of approximately 25,000 average NSW homes, while the associated carbon emission displacement is equivalent to taking about 45,000 cars off the road.” the statement from TransGrid continued.

TransGrid will oversee the construction and operation of a new substation at the Beryl solar farm so they’re able to then connect that to the existing Beryl substation. This will happen in the second half of the year. 

If you’d like to learn more about the Series 6 module please click here to watch a video on the manufacturing process. 

Read More Solar News: